Take a look at our FAQs to find the answers you need. You can also download installation guides, filter cartridge replacement instructions and buy spare parts.
For safety reasons the system is designed to relieve the pressure build up in the tank directly through the tap to the outlet. Consequently, the occasional drip and splutter from the spout is normal. If the discharge appears excessive first check the tubes connecting the tap to the storage tank are not kinked. If these are okay, then check the dial on the front of the heater tank. It must not be set beyond the max in the red section on the label.
If the discharge from the spout is particularly violent disconnect the electricity supply and contact The FreshWater Filter Company on 01603 871594.
Generally, this indicates that the filter cartridge is clogged with contaminants and needs replacing. You can check by operating the system with no cartridge in the filter housing.
The period between cartridge replacements is not guaranteed; it is an estimate based on filtering mains water of average quality. Please bear in mind that water quality varies from locality to locality and situation to situation. In areas with higher than average turbidity (particle contamination) more frequent cartridge changes may be necessary.
- Check that the electrical supply is correctly connected.
- Check the 13amp fuse in the plug.
If you are still experiencing problems after completing these steps please contact The FreshWater Filter Company on 01603 871594
In hard water areas a ‘scum’ can appear on the surface of hot tea. Although unsightly it is completely harmless. The cause is related to the precipitation of calcium and magnesium in hard water regions and a reaction with the tea bag material. Changing tea bags will often remedy the problem.
Alternatively, you can consider switching to an ‘Amber’ (Code: CD-25-PF) chlorine and limescale reduction filter cartridge which will remove the calcium and magnesium however please note this filter will need to be changed more frequently, perhaps every 2-3 months.
This is caused by a combination of the agitation of the instant hot water creating millions of tiny air bubbles, the PH of the water and the amount of oil in the teabag material. Experimenting with different tea bags is worth a try. To reduce the problem try filling the teapot or cup with instant water before dropping the tea bag in rather than running the instant hot water directly onto the teabag or perhaps experiment with different brands of tea bag.
A new filter cartridge has a significant amount of air trapped in the microporous structure of the cartridge. This will form tiny bubbles and give the water in the glass a milky appearance that will soon disperse when left to stand for a few moments. This may continue for 2 to 3 weeks until the cartridge is fully conditioned.
Tiny black specs may appear initially in the water. These are harmless particles of carbon; residues from the manufacturing process. Allow the filtered water to continue flowing for a while until they are Completely flushed through.
This can be reduced by wrapping insulation around the pipes in question.